Herringbone Glass Mosaic Tile - Brick Red
This herringbone glass mosaic tile has rich undertones of red and orange balanced with whites, greys, and deep/medium browns. This tile is the perfect blend of rustic and modern. No matter what look you are going for - the final project speaks for itself!
Full Sheets: $29.99/Sq Ft
4" x 6" Samples: $6.99 Each
Dimensions: 1.25" x .75" tiles (Individual tiles vary in size) on a 12" x 12" mesh
Weight: 2.7 lbs/Sq Ft
Quick tips for Glass Subway Tile Installation
Please note, these are general guide lines and tips for installing glass subway tiles. They are not meant to replace the expertise of a tile setter. Hiring a professional tile contractor is recommended for proper tile installation.
Recommended Application: Residential, Light Commercial, Medium Commercial, Bath/Shower, Fireplace, Indoor, Wall
Grout: A non-sanded grout is recommended to avoid scratching/damaging your glass tile. Grout sealer should be applied after the grout has fully cured to keep grout lines looking clean and fresh over time.
Trowel: Please use a 3/16” or 1/8” v notch trowel.
Spacers:1/16” or 1/8” spacers should be used. Spacers larger than 1/8” are not recommended for use with non-sanded grouts.
Adhesive: Please use a white adhesive that is recommended for glass tiles and mosaics. The bag or bucket of adhesive will state weather it can be used with glass tiles.
Cutting Glass Tile: To cut your tile, please use a tile wet saw with a glass cutting diamond blade. Please note, any other type of tile blade may cause chipping along the edge. You may also use a carbide cutter to make straight cuts. However, L shaped cuts can only be made with a wet saw.
Wet Areas: You may require use of a waterproof membrane when your tile is being installed in wet areas such as a tub surround or shower. We recommend using redgard. .