Jasper Blue Gray Arabesque Glass Mosaic Tiles
Bring a touch of elegance to your new new kitchen backsplash or bathroom with our Jasper Arabesque Glass Tiles. These tiles are stunning! The color is a blue gray with a slight touch of green. Consider mingling other colours in this series to add a little pop to your project! Jasper is also available in our Linear Mosaic Tiles, 2x12, 3x6 and 4x12 Glass Subway Tiles and Glass Pencil Trim!
1 Sq Ft: $32.99
1 Piece Sample: $6.99
Weight: 3.8 LBS/ Sq Ft
Individual Glass Pieces: 6.25" x 5.25"
Finish: High Gloss
Quick tips for Glass Mosaic Tile Installation
Please note, these are general guide lines and tips for installing glass mosaic tiles. They are not meant to replace the expertise of a tile setter. Hiring a professional tile contractor is recommended for proper tile installation.
Recommended Application: Residential, Light Commercial, Medium Commercial, Bath/Shower, Fireplace, Indoor, Wall
Grout: A non-sanded grout is recommended to avoid scratching/damaging your glass tile. Grout sealer should be applied after the grout has fully cured to keep grout lines looking clean and fresh over time.
Trowel: Please use a 3/16” or 1/8” v notch trowel.
Adhesive: Please use a white adhesive that is recommended for glass tiles and mosaics. The bag or bucket of adhesive will state weather it can be used with glass tiles.
Cutting Glass Tile: To cut your tile, please use a tile wet saw with a glass cutting diamond blade. Please note, any other type of tile blade may cause chipping along the edge. You may also use a carbide cutter to make straight cuts. However, L shaped cuts can only be made with a wet saw.
Wet Areas: You may require use of a waterproof membrane when your tile is being installed in wet areas such as a tub surround or shower. We recommend using redgard. .